Salicru CV50-008-4F Скачать руководство пользователя страница 8

Страница: 8 / 144

8 - 144

Safety precautions

1.4.3 Maintenance and replacement of components



Only qualified electricians are allowed to perform the maintenance, inspection,
and components replacement of the inverter.



Disconnect all power supplies to the inverter before the terminal wiring. Wait for
at least the time designated on the inverter after disconnection.



Take measures to avoid screws, cables and other conductive materials to fall
into the inverter during maintenance and component replacement.

Note:



Please select proper torque to tighten screws.



Keep the inverter, parts and components away from combustible materials during maintenance and

component replacement.



Do not carry out any isolation and pressure test on the inverter and do not measure the control circuit of

the inverter by megameter.



Carry out a sound anti-electrostatic protection to the inverter and its internal components during

maintenance and component replacement.

1.4.4 What to do after scrapping



There are heavy metals in the inverter. Deal with it as industrial effluent.

Содержание CV50-008-4F

















































































































































Результаты поиска

Содержание CV50-008-4F

Отзывы:

Salicru CV50-008-4F, Руководство пользователя, Страница: 8 / 144

Результаты поиска

Содержание CV50-008-4F

Отзывы: