Remote Control Commands
R&S
®
SMF100A
409
Operating Manual 1167.2319.02 ─ 12
:SENSe[:POWer]:SWEep:HCOPy:DATA?
Queries the measurement data directly. The data is transferred to the remote client as
data stream, e.g. for further processing (see
Chapter 6.3.3, "SCPI Parameters"
on page 331, description of block data).
Readable ASCII data is available for hardcopy language CSV. The representation of
the values depends on the selected orientation for the CSV format.
Return values:
<Data>
block data
Example:
SENS:SWE:HCOP:DEV:LANG CSV
selects output format *.csv.
SENS:SWE:HCOP:DEV:LANG:CSV:ORI HOR
selects horizontal orientation
SENS:SWE:HCOP:DEV:LANG:CSV:SEP SEM
selects ";" as the separator between the values
SENS:SWE:HCOP:DEV:LANG:CSV:DPO DOT
selects "." as decimal point
SENS:SWE:HCOP:DATA?
queries the measurement data of the current traces
Response:
#2651009500000;1019000000;1028500000;1038000000
-9.5;-9.7;-6.3;-2.5
The hash symbol # introduces the data block. The next number
indicates how many of the following digits describe the length of
the data block. In the example the 2 following digit indicates the
length to be 65 characters.
Because horizontal representation is selected, a row with all the
x-values of the active trace (frequency) follows. The second row
contains all the y-values of the active trace (power). The rows
end with a new line (each counts as one character).
Note:
if more than one trace is active, the third row contains the
x values of the second active trace, and so on.
Example:
SENS:SWE:HCOP:DEV:LANG:CSV:ORI VERT
selects horizontal orientation
SENS:SWE:HCOP:DATA?
queries the measurement data of the current traces
Response:
#2681009500000;-9.5; 1019000000;-9.7; 1028500000;-6.3;
1038000000;-2.5;
for vertical representation the length of the data block is 68
the first power value, the second row contains the second fre-
quency value of the active trace followed by the second power
value, and so on. The rows end with a new line (each counts as
one character).
Note:
if more than one trace is active, the first row also contains
the value pairs of the second active trace, and so on.
Usage:
Query only
Power Sensor Measurement Subsystems
