manualshive.com logo in svg

Rohde & Schwarz SMF-B1, Руководство по эксплуатации

Поделиться
Скачать
Rohde & Schwarz SMF-B1 Скачать руководство пользователя страница 161

Instrument Function

R&S

®

SMF100A

146

Operating Manual 1167.2319.02 ─ 12

4. In the address field, enter 

ftp://<"IP Address" of the Instrument>

, e.g.

ftp://10.113.10.105

A log on dialog opens and requests a password.

Tip: 

Default password. The FTP file access use the user 

instrument

 with default

password 

instrument

.

It is highly recommended that you change the user password in the "Security" dia-
log before connecting the instrument to the network!
See 

Chapter 5.2.3.19, "Security"

, 

on page 125.

5. Enter the password to access the 

/var/user/share

 directory.

You can access the files in the 

/var/user/

 directory, perform standard function

like creating directory, etc.

6. Open the 

/var/user/share

 directory and create a new directory, e.g. 

testftp

.

7. On the instrument, press the FILE key and open the 

/var/user/share

 directory.

The dialog displays the 

testftp

 dircetory.

To access the file system of the R&S

 

SMF via SMB (Samba)

The SMB (Samba) protocol is an alternative way to access the file system of the instru-
ment form a remote PC, if both the instrument and the PC are connected to a LAN.

1. Connect the instrument and the remote PC to a LAN.

2. Find out the "IP Address" of the instrument:

a) Select "Setup > Environment > Network Settings".

General Instrument Settings

Содержание SMF-B1














































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды