manualshive.com logo in svg

Rohde & Schwarz SMF-B1, Руководство по эксплуатации

Поделиться
Скачать
Rohde & Schwarz SMF-B1 Скачать руководство пользователя страница 121

Instrument Function

R&S

®

SMF100A

106

Operating Manual 1167.2319.02 ─ 12

Hardware Options / Software Options

The tables in the sections "Hardware" and "Software" list the installed hardware and
software options.

"Option"

Short name of option

"Designation"

Name of option

"Expiration Date"

For regular options, "Permanent" is indicated in this column. Some
options are available as trial versions. This column shows their expi-
ration date. After this date, the option is no longer available on the
instrument.

Remote command: 

*OPT?

 

on page 351

*IDN?

 

on page 351

Loaded Modules

Section "Loaded Modules" is provided for service purposes. It lists all loaded software
modules with their versions and offers a short description of each module.

Remote command: 
n.a.

5.2.3.4

Manage License Keys

This dialog is the central dialog for managing licenses, like enabling newly purchased
and/or newly registered options or performing the required instrument related steps
during the process of unregistration of licenses.

An option is ready to operate after it is enabled by means of a license key code sup-
plied with the option. The license key is delivered as a file or on paper. Unregistered
licenses must be registered for a particular instrument prior to the corresponding option
can be enabled for operation.

 

General Instrument Settings

Содержание SMF-B1














































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды