Setting the Parameters
R&S UP300/350
E-1147.2759.00
5-68
Operating Manual, 11/2007
Terminating
entries
8. a)
Press the
function key
to terminate the entry.
The
new unit
is displayed and the input window is closed.
b)
Press the
key
The R&S UP300/350 sets the value that has been set numerically but
with the
old
unit
. The entry window is closed.
Note:
If a parameter is unitless or always has the same unit, you can set
and terminate the entry only with the
ENTER key
.
c)
Press the
key
The
old value
is retained. The entry window is closed.
Invalid
parameter entry
If the limit value is reached, the numeric value in the entry window remains
the same and is neither increased nor decreased. No error message is
issued.
Using another unit
of measure to
display a value
1.
Press the
function key
in the
menu.
An entry field containing the current setting is displayed. At the same
time, the function keys are assigned various units of measurement.
2.
Press the
function key
to display the value in
Hz
.
Ö
The numerically set value is displayed using the
new unit
. The input
window is
not
closed.
Note:
In the parameter list, values from 1 to 999 are displayed in front of the
decimal point. In other words, if the digit sequence <5000> and the unit <Hz>
are entered, <5.000 kHz> appears in the display.
Содержание Smart Instruments UP300
Страница 1: ...11 2007...
Страница 20: ...R S UP300 350 E 1147 2759 00 1 20 Operating Manual 11 2007...
Страница 30: ......
