Rohde & Schwarz Smart Instruments UP300, Руководство по эксплуатации

Страница: 303 / 355

R&S UP300/350 Graph Menu
Operating Manual, 11/2007 6-303 E-1147.2759.00
6.4.4.1.2 Assigning the X Cursors to a Trace (Ch 1 or Ch 2)
Use When activated, the cursor is positioned on the trace of the current channel
(Ch 1 or Ch 2). If both channels are active, you can, however, assign the X
cursor to a particular trace.
ƒ Ch 1
The X cursor is placed on the trace of channel Ch 1.
ƒ Ch 2
The X cursor is placed on the trace of channel Ch 2.
Assigning
X cursors
to a trace 1. Activate the X1 cursor, for example (
Ê
6-302).
2. Press the function key in the cursor X1 submenu .
A selection field containing the available settings is displayed. The
default setting is “Ch 1“. However, the default setting depends on cursors
(X1 to Ch1, X2 to Ch2) and channel selection.
3. Use the rotary knob
[11] to select a setting.
4. Press the ENTER key
[5] to close the selection field.
The new setting is displayed in the measurement diagram.
6.4.4.1.3 Positioning the X Cursors on a Maximum
Use
If you have activated an X cursor, you can position it automatically on a
maximum:
ƒ Max
The X cursor is positioned on the highest maximum in the display area.