Rohde & Schwarz Smart Instruments UP300, Руководство по эксплуатации

Страница: 124 / 355

Generator R&S UP300/350
E-1147.2759.00 6-124 Operating Manual, 11/2007
Entering the Frequency
Use You can enter the frequency of the individual signal components. The entered
value will be automatically adjusted because the frequency has to be an
integer multiple of the frequency resolution (spacing,
Ê 6-126).
The individual frequencies can be spaced as closely as required or can even
overlap (the frequency resolution must, however, be taken into consideration
in all cases).
Note: The setting is always valid for both channels (Ch 1&2).
Selecting the
signal component 1. Select a signal component in the parameter field using the
6 or 5
cursor keys .
The line (signal component) is highlighted.
Entering the
frequency
2. Press the function key in the submenu.
An entry field containing the currently applicable setting is displayed. The
default setting is “1000.576 Hz“. At the same time, the function keys are
assigned various units of measurement.
3. Enter a new value ( Ê 5-65).
The permissible entry range is:
f
Spacing
≤
FREQ
≤
f
max
within: f
Spacing
- spacing for frequency setting ( Ê 6-126)
f
max
- maximum frequency of generator type (
Ê
6-107)
The new setting is stored and displayed in the parameter field.
Ch 1&2