Rohde & Schwarz Smart Instruments UP300, Руководство по эксплуатации

Страница: 110 / 355

Generator R&S UP300/350
E-1147.2759.00 6-110 Operating Manual, 11/2007
6.2.2 Setting the Generator Signal Type (FUNCTIONS)
Description In the FUNCTIONS menu, you can select the generator signal. The selected
function is displayed in a vacant field in the menu bar and is available as a
menu key to allow you modifying the function parameters. At the same time,
the appropriate function is activated in the generator.
One signal type can be activated in combination with NOISE and
DC OFFSET. All other function keys are deactivated (displayed in gray).
When you have selected a function in the menu bar, the list of available
signal parameters appears on the screen (
Ê 6-112).
Selecting the
FUNCTIONS menu
Select the menu with the
3
or
4
cursor keys .
The menu name is highlighted and the function keys [13] are assigned
the appropriate function.
The 1
st
function key
assignment
Display the next set of functions.
Sinewave signal ( Ê 6-114)
Noise signal ( Ê 6-119)
Multi-sinewave signal ( Ê 6-122)
Sine burst signal ( Ê 6-132)
Two-tone signal for measurement of modulation distortions (
Ê
6-138)
Difference frequency signal ( Ê 6-144)