Rohde & Schwarz Smart Instruments UP300, Руководство по эксплуатации

Страница: 123 / 355

R&S UP300/350 Generator
Operating Manual, 11/2007 6-123 E-1147.2759.00
Entering the Number of Sinewave Tones
Use You can enter up to 17 sinewave tones with selectable relative amplitude.
Note: The setting is always valid for both channels (Ch 1&2).
Entering the number
1. Press the function key in the menu.
An entry field containing the currently applicable setting is displayed. The
default setting is “1“.
2. Enter a new value, e.g. 7 ( Ê 5-65).
The permissible entry range is:
1
≤
NUMBER OF SINE
≤
17
The new setting is stored and displayed in the parameter field.
Configuring the Signal Parameters
Description
In the COMPONENT LIST menu, you can configure the parameters for the
individual signal components (sinewave tones).
Selecting the
COMPONENT LIST
submenu
Press the function key in the menu.
The menu name is highlighted and the function keys [13] are assigned
the appropriate function. The current sinewave tones together with the
frequency, phase, and relative amplitude are displayed in the parameter
field.
Function key
assignment
Exit the submenu.
Enter the frequency. ( Ê 6-124)
Enter the start phase. ( Ê 6-125)
Enter the relative signal amplitude. ( Ê 6-125)
Ch 1&2