Rohde & Schwarz Smart Instruments UP300, Руководство по эксплуатации

Страница: 63 / 355

R&S UP300/350 Setting the Parameters
Operating Manual, 11/2007 5-63 E-1147.2759.00
5.5 Setting the Parameters
Choice
of methods Parameters can be set in a number of ways:
ƒ Direct selection of an instrument function (function key)
ƒ Toggling a setting
ƒ Selecting settings from selection fields
ƒ Entering numerical parameters in entry fields
The numeric keys [12], the main menu selection keys [10], rotary knob [11],
cursor keys [6, 7], function keys [13] and action keys [4, 5] can all be used to
select and enter instrument parameters.
5.5.1 Direct Selection of Instrument Functions
Introduction When you select a menu, various instrument functions are displayed in the
function area. Some instrument functions can be set directly by pressing a
function key.
Example:
Scaling the X axis
(
Ê 6-292)
1. Press the main menu selection key .
2. Select the menu with the
3 or 4
cursor keys [6].
3. Press the function key in the menu.
The X axis of the measurement diagram is automatically scaled.
5.5.2 Toggling a Setting
Introduction When a menu is selected, a number of instrument functions will be displayed
in the function area. Some instrument functions can be switched on or off by
a stroke of the function key (toggling).
The function key is highlighted when the instrument function is active.
Example:
Activating/
Deactivating the
channel output Ch 1
(
Ê 6-104)
1. Press the main menu selection key .
2. Select the menu with the
3 or 4
cursor keys [6].
3. Press the numeric key to select the channel Ch 1 .
4. Press the function key in the menu.
The function key is highlighted and the new setting is saved. After
switching on, the output signal with the currently set parameters is
present at the output [8].
5. To deactivate the channel output Ch 1, press the function key in
the menu .
The function key is no longer highlighted and the output signal is no
longer present at the channel output.