R&S FSH
Operating the R&S FSH
Managing Datasets
Operating Manual 1173.6275.12 - 30
31
1.9.1 Saving Datasets
The R&S FSH allows you to save the data that is currently analyzed at any time.
► Press the SAVE/RECALL key.
The R&S FSH opens the file manager.
► Press the "Save" softkey.
The R&S FSH opens the "Save Dataset" dialog box.
1
Available datasets and folder structure
2
Dataset name input field
3
Remaining memory on selected data storage device
4
File manager softkey menu
The folder structure shows all available data storage devices. Possible storage devices
are the internal memory of the R&S FSH, an SD card or a memory stick.
The default storage device depends on which devices are connected to the R&S FSH.
● If an SD card is connected, datasets are always stored there first.
● If a memory stick is connected, datasets are stored there only if no SD card is
connected.
● The internal memory is used only if neither SD card or memory stick are connected.
The internal memory provides approximately 20 MB of data, therefore the number of
datasets you save on the R&S FSH is limited. Each dataset needs about 100 kB of
memory, but this value can vary.
If you are using an external storage device, the number of datasets you can save is
limited only by the size of the storage device.
The R&S FSH shows the remaining memory on the storage device in the dialog box.
► Select the storage device you want to save the data to.
► Select the folder you want to save the data to.
► Enter a file name in the corresponding input field.
