ROBBE TAK5-SA2-KFA-27-F1, Инструкция по эксплуатации

Страница: 134 / 182

134
Cleaning
:
Open the quick--coupling for sponge cleaning.
:
If necessary, soak the sponge with a cleansing agent and insert it into the opening.
:
Close the quick--coupling.
Press Start/Stop, in order to start the cleaning process.
During the cleaning process approx. 750 ml of water are delivered into the stainless steel
coil located inside the heat exchanger.
After cleaning has been completed, the display shows:
:
Press the manual key „Mixer outlet valve“ to remove the water from the mixer jar or to
let it draw off via the mixer outlet valve. Air in the hoses prevents the water from drai-
ning off. In this case, keep the push--button at the upper left of the chassis pressed to acti-
vate the feeding pump.
:
In order to rinse again by means of clear water, press the manual keys „Water solenoid
valve“ and „Milk pump“ simultaneously or reactivate the function „HE with sponge,
Cleaning“ in program switch position „Rinsing“ (without inserting the sponge).
15.2 Heat Exchanger
The heat exchanger cleaning consisting of pre--cleaning, main cleaning and rinsing has to be
carried out daily. During heat exchanger cleaning, all milk--supplying parts of the automatic
feeder (except for the suction hoses) are thoroughly cleaned to prevent creation of milk de-
posits or other impurities.
The heat exchanger can also be cleaned automatically (see Menu „Cleaning, Settings“). If
automatic heat exchanger cleaning is active, automatic mixer cleaning becomes no longer
necessary, as the mixer jar is cleaned too.
You will find a detailed description of the individual functional steps in chapter „Function
Steps: Cleaning the Heat Exchanger“ (annex of this instruction manual).
Turn the program switch to 2 = rinsing.
Press Arrow Up or Arrow Down to select submenu „Clea-
ning, Heat Exchanger“.
Press Arrow Right to move to the next screen.
HE with sponge
cleaning finished
cleaning
HE with sponge^
➔
cleaning
heat exchanger^
➔
heat exchanger
cleaning ?
start
➔