ROBBE TAK5-SA2-KFA-27-F1, Инструкция по эксплуатации

Страница: 117 / 182

117
Alarms
14 Alarms
The automatic feeder and the concentrate feeder are continuously monitored by the proces-
sor control. In switch position 3 = alarms you can view all those alarm messages relating to
the failures of the automatic feeder or to animals’ drinking behaviour.
The failures that interrupt the feeding mode are immediately displayed in program switch
position 1 = „Feeding Mode“.
14.1 Machine Alarms
Menu „Machine Alarms“ contains all alarm messages referring to the failures of the auto-
matic feeder. A bleep is emitted at regular intervals. The error message disappears as soon
as an animal is identified.
In case failures relating to the concentrate feeder and/or the animal scales should occur, the
feeding mode will be kept up. In case of failures in the feeding mode due e.g. to water shor-
tage, the concentrate mode will be kept up.
If failures occur, the display will show:
Turn the program switch to 3 = alarms to view the error mes-
sages.
14.1.1 Connection Error concerning Animal Scales or Concentrate Feeder
If the connection between the Stand Alone and the concen-
trate feeder is interrupted, the display will show the following
error message:
Potential corrective action:
:
Check connection cable to the concentrate feeders.
:
Check power supply of the concentrate feeders.
If the connection between the Stand Alone and the animal
scales is interrupted, e.g. the following error message will be
displayed:
After 11 connection errors to the animal scales an alarm is
triggered.
Potential corrective action:
:
Check connection cable to the animal scales.
:
Check power supply of the animal scales.
The number of connection errors is automatically set to 0 during daily calculation. The auto-
matic feeder retries to establish a connection to the concentrate feeder or to the animal sca-
machine alarms
see alarms
silo 1&2
connectioninterrup.
anim. scales 1&2
number errors: 1