ROBBE TAK5-SA2-KFA-27-F1, Инструкция по эксплуатации

Страница: 118 / 182

118
Alarms
les. Press „C“ to manually set back the connection errors to 0.
14.1.2 Checking the Calibration Values for Concentrate
If an animal enters a concentrate station where the concentrate
has not been calibrated and is identified, the display will show
an error message. The alarm--LED on the concentrate feeder
starts flashing.
In menu „Machine Alarms“ you are asked to calibrate the
concentrate of the corresponding silo.
The alarm message disappears as soon as calibration has been
completed.
14.1.3 The Shaft is Blocked
If the shaft is blocked, the following error message will be
displayed:
The concentrate feeder is out of action and the alarm--LED on
the concentrate feeder starts flashing.
Potential corrective action:
:
Check whether some foreign matter has got caught in the shaft and remove it, if neces-
sary.
:
The motor sensor resp. motor/gear may be defective. In this case, contact Service.
14.1.4 Idling of the Shaft on the Concentrate Feeder
As soon as an animal consumes its concentrate portion, the dosing flap starts moving after
approx. 5 -- 6 seconds (= 5 revolutions of the shaft). If the flap does not move due e.g. to
bridging of the feed, distribution will cut off without being deducted. After the animal has
left the feeding station, dosing will be checked. If the dosing flap still does not move, an
alarm will be triggered. The alarm--LED on the concentrate feeder starts flashing but the
concentrate feeder does not switch off. As soon as the next animal enters the concentrate
station, the feeder retries to dose the concentrate.
The error message indicates e.g. that 2 idlings of the shaft oc-
curred in silo 1. The first line shows the date of last deletion
of this error message.
Potential corrective action:
:
Check whether the dosing flap is easily moving.
:
Change position of the adjustable plate with reed switch.
machine alarms
see alarms
silo 2
please calibrate !!
silo 1^
shaft blocked
silo1^14.07.03
idling shaft: 2