ROBBE TAK5-SA2-KFA-27-F1, Инструкция по эксплуатации

Страница: 133 / 182

133
Cleaning
15 Cleaning
The automatic feeder has to be cleaned regularly, particularly if fresh milk is fed. You can
choose between the following options:
:
HE with sponge (HE = Heat Exchanger)
:
Heat exchanger
:
HE with hoses
:
Mixer
:
Compressed air--cleaning
:
Cleaning settings for: heat exchanger, mixer, suction hoses, remaining portions, detergent
and compressed air--cleaning.
Select the type and frequency of the cleaning process in accordance with the composition
and the germ--content of the milk that has to be fed.
You can activate the keys 1 and 2 (feeding station 1 + 2), the mixer outlet valve (key 5) as
well as the feeding pump even in program switch position 2 = rinsing, but only if no clea-
ning process is running. The water in the mixer jar is then drained off by means of the fee-
ding pump either via the suction line or the mixer outlet valve.
If the automatic feeder is equipped with a detergent dosing pump, you have to select it in
„Setup“. In this case, the detergent is added automatically to all cleaning processes (except
for „HE with sponge“).
15.1 HE with Sponge
Clean the heat exchanger regularly in order to remove potential milk deposits inside the
stainless steel coil, . The cleaning sponge is used as a mechanical cleaning aid.
Insert the cleaning sponge into the milk--supplying pipe via the easily accessible quick--cou-
pling. The cleaning sponge is then pressed through the heat exchanger by the water. After
the cleaning process has been completed, remove the cleaning sponge from the mixer jar.
In case the cleaning sponge pushes forward dirt or deposits, repeat the cleaning process at
regular intervals.
If you soak the sponge with a cleansing agent, you have to rinse by means of clear water.
Proceed as follows:
Turn the program switch to 2 = rinsing. The display shows:
Move to the next screen.
cleaning
HE with sponge^
HE with sponge
cleaning?
start