ROBBE TAK5-SA2-KFA-27-F1 Скачать руководство пользователя страница 171

Страница: 171 / 182

Annex

delivered once again into the mixer jar via the coil and is drained off again via the mixer

outlet valve. Finally the mixer jar is rinsed by a 500 ml water portion that is subsequently

pumped out.

During the pre--cleaning process, the display shows:

Main cleaning

During the main cleaning process, 1.25 liters of water and --

in case the automatic feeder is equipped with a detergent do-

sing pump that has been previously selected in Setup -- some

detergent are delivered into the mixer jar. The water starts

circulating. The display shows:

Time starts running backwards from 10 to 0 minutes. Press

Start/Stop to cut off the cleaning process at any time.

After 10 minutes have lapsed, the liquid in the mixer jar is

pumped out via the mixer outlet valve. The following mes-

sage is displayed:

Rinsing

The rinsing process starts running in order to be sure that there is no detergent in the coil of

the heat exchanger anymore. 800 ml of water are delivered automatically from the coil into

the mixer jar and are then pumped out via the mixer outlet valve. The mixer is then rinsed

by 500 ml of water that are subsequently drained off. The coil is rinsed for 5 seconds by

800 ml of water, i.e. the water in the mixer jar circulates to the coil and is pumped out im-

mediately afterwards. Now 1 liter of water is delivered once again from the coil into the

mixer jar and is drained off again via the mixer outlet valve. Finally the mixer jar is rinsed

by a 500 ml water portion. This water is subsequently pumped out, too.

During the rinsing process the display shows:

The electrodes and valves are checked automatically. 1.5 li-

ters of water are delivered into the mixer jar where they are

stirred for 20 seconds. After that, they are drained off via the

mixer outlet valve. This process should remove all residual

foam inside the mixer jar.

After heat exchanger cleaning has been completed, the coil is filled with water. If an entitled

animal enters the feeding station, the water portion in the heat exchanger will be delivered

into the mixer jar and drained off via the mixer outlet valve. Only then a milk portion starts

to be prepared.

Turn the program switch to position „Feeding Mode“, in order to go back to feeding mode.

Notes on automatic heat exchanger cleaning (time--controlled)

If the electrode is covered, automatic heat exchanger cleaning will be deferred for 1 hour at

most so that an animal has the opportunity to drink up the liquid in the mixer jar. If the an-

imal does not drink up the liquid within this time (the electrode is still covered), the liquid

will be drained off via the mixer outlet valve and the cleaning cycle starts running.

pre-rinse HE

clean HE

rem.:10:00min stop?

clean HE

emptying mixer

afterrinse HE

finished

Содержание TAK5-SA2-KFA-27-F1























































































































































































Результаты поиска

Содержание TAK5-SA2-KFA-27-F1

Отзывы:

Похожие инструкции для TAK5-SA2-KFA-27-F1

Бренды по названию

Популярные бренды

ROBBE TAK5-SA2-KFA-27-F1, Инструкция по эксплуатации

Результаты поиска

Содержание TAK5-SA2-KFA-27-F1

Отзывы:

Похожие инструкции для TAK5-SA2-KFA-27-F1

Бренды по названию

Популярные бренды