ROBBE TAK5-SA2-KFA-27-F1, Инструкция по эксплуатации

Страница: 139 / 182

139
Cleaning
Alarms“). You can view and delete the alarm message in menu „Alarms“ (program switch
position 3). If necessary, check whether the suction hose or the mixer outlet valve are blok-
ked. Remove the rinsing water from the mixer jar.
If the detergent has been added automatically to the rinsing water, the feeding mode will be
interrupted until the problem has been solved.
If no detergent has been added automatically to the rinsing water, the fault message disp-
played on the screen will disappear as soon as an entitled animal enters the feeding station.
The animal will then get the liquid in the mixer jar. The bleep accompanying an alarm mes-
sage stops sounding as soon as you clear the alarm message in menu „Alarms“ (program
switch position 3).
If the long electrode is covered, automatic mixer cleaning will be deferred for 1 hour at
most so that an animal has the opportunity to drink up the liquid in the mixer jar. If the an-
imal does not drink up the liquid within this time (the electrode is still covered), the liquid
will be drained off via the mixer outlet valve and the cleaning cycle starts running.
15.4.2 Calling Up Automatic Mixer Cleaning Manually
You can activate automatic mixer cleaning manually at any time in menu „Cleaning“.
Turn the program switch to 2 = rinsing.
Press Arrow Up or Arrow Down to select submenu „Mixer“.
Press Arrow Right to move to the next screen.
Press Start/Stop.
If you do not activate the detergent dosing pump in Setup,
during the automatic cleaning cycle the detergent will not be
added automatically to the water. If necessary, manually add
some detergent to the water.
If you have activated the detergent dosing pump in Setup,
press Start/Stop to move to the next screen.
Change or maintain the pre--set detergent amount and press
ENTER to confirm the input. Automatic cleaning starts run-
ning.
If the level electrode is covered, the remaining portion in the mixer jar will be pumped out
via the mixer outlet valve before cleaning starts running.
If you turn the program switch to another position while the mixer is running, the third por-
tion will be distributed only after you turn the program switch back to position „Rinsing“ or
„Feeding Mode“.
cleaning
HE with sponge^
➔
cleaning
mixer^
➔
mixer
cleaning ?
start
cleaning mixer
detergent
0 g/L