ROBBE TAK5-SA2-KFA-27-F1, Инструкция по эксплуатации

Страница: 25 / 182

25
Mounting the Race--Way
4.5 Connecting the Micro--Identification
:
Connect the micro--identification according to mounting instructions.
Install the cable for the micro--identification in such a way that calves cannot touch it.
4.5.1 Identification „Mikro--Nedap“
:
In case of „Mikro--Nedap“: carefully check the wiring as well as the program chip.
Check the identification range of the antennas by means of an antenna test (refer to chapter
8.8.3, page 58 ff, „Automatic Reading of the Responder Number and Antenna Test“).
Should identification errors occur, in case of „Mikro--Nedap“ you can set the identification
range of the antennas by the Squelch value. In case a concentrate feeder should be con--
nected, you have to set the Squelch value in „Setup“. See chapter 8.3.1, page 42 ff, „Setup,
Activating the Concentrate“.
4.5.2 Identification „Mikro--Tiris“
:
In case of „Mikro--Tiris“: carefully check the wiring as well as the program chip.
Check the identification range of the antennas by means of an antenna test (refer to chapter
8.8.3, page 58 ff, „Automatic Reading of the Responder Number and Antenna Test“). In
case of double or foreign identifications, you have to install an appropriate screening by
means of earthed metal sheet plates.