ROBBE TAK5-SA2-KFA-27-F1, Инструкция по эксплуатации

Страница: 100 / 182

100
Milk Functions
11.6 Entering the Milk Ratio Plan
The milk ratio plan is divided into 5 periods. You can enter the milk composition (fresh milk
and milk powder) for each group. Milk and water can be mixed from 30 % to 90 % in 1 %
steps. If the automatic feeder is equipped with a heat exchanger with circulation pump, milk
and water can be mixed from 10 % to 90 % in 1 % steps.
The milk concentration is determined by the concentration plan in consideration of the milk
value (= solid matter content of the milk). Refer to the milk ratio plan in the annex of this
instruction manual.
If some animals are fed either with milk or with MP+water, you have to allocate them to
different feeding groups. (The animals can nevertheless be together in the same group box).
In case e.g. the animals of group A should only get milk, you have to enter the desired milk
ratio into the milk ratio plan. In case e.g. the animals of group B should only get MP+water,
you have to set the milk ratio to „0“ for all periods in the milk ratio plan.
Select submenu „Milk Ratio Plan“.
Go to the next screen.
Select the group.
Move to the next screen.
Press ENTER and enter the duration of period 1.
Press ENTER to confirm the input.
Enter the milk ratio at the beginning and at the end of the pe-
riod. Press ENTER.
Move to the next screen for the periods 2 to 5 and proceed as
with period 1.
Go to the next screen. The display shows the duration of the
milk ratio plan and the feeding plan.
Standard value for all 4 groups:
Milk ratio period 1 = 100 %
Periods 2 -- 5 are not active by standard.
3# milk ratio plan^
➔
3# milk ratio plan^
group A^ ➔
3# A per.1 77 days
fr. 100 to 100 %
➔
3# A per.1 7 days
fr. 100 to 100 %
➔
3# A per.1 7 days
fr. 100 to 100 %
➔
3# A per.1 7 days
fr. 100 to 100 %
➔
3# A per.2 28 days
fr. 100 to
25 %
➔
3# plan: 77 days
feed. plan: 77 days