ROBBE TAK5-SA2-KFA-27-F1, Инструкция по эксплуатации

Страница: 47 / 182

47
Setup
Enter „yes“ to register the feeding station and press ENTER
to confirm the input.
The feeding stations 1 and 2 are registered as a standard (yes).
If the milk is delivered over a long distance, it is useful to prolong draining time. This ensu-
res that the mixer jar is entirely emptied after the last portion has been consumed.
Press Arrow Right to move to the next screen.
Select feeding station 1 or 2.
Press ENTER to confirm the input.
Enter draining time in seconds and press ENTER.
Standard value for draining time: 16 seconds. Potential input: 10 to 60 seconds.
8.3.7 Portion
Distribution pause
The distribution pause regulates milk distribution. As soon as the automatic feeder starts to
prepare the milk, the stop valve or the two--group valve unit close for the duration of the
entered distribution pause. Set a distribution pause only if you utilize not readily soluble
milk powders or in case of very high concentrations (> 200 g/L) and extreme drinking
speeds (> 2 L/min).
To ensure that the animals are fed as soon as they enter the feeding station, the first milk
portion is distributed without taking the distribution pause into account. After the last por-
tion has been distributed to the animal, the valve closes only at the end of the entered drai-
ning time.
Press Arrow Up or Arrow Down to select menu „Distribution
Pause“.
Press Arrow Right to move to the next screen. Press ENTER
to open the memory.
Enter the desired distribution pause. Potential input: 0 to 16
seconds.
Press ENTER to confirm the input.
5# box no. 1^
available ? yes
5# draining time
box 1^: 16 sec.
5# draining time
box 1^: 16 sec.
5# draining time
box 1^: 16 sec.
5# draining time
box 1^: 20 sec.
5# setup
distrib. pause ^
➔
5# distrib. pause
0 sec.
5# distrib. pause
7 sec.