135
Cleaning
Press Start/Stop. If the automatic feeder is equipped with a
detergent dosing pump that has previously been selected in
Setup, the display will show:
Enter the detergent amount and press ENTER to confirm the
input
(see annex)
.
The pre--cleaning process starts running
(see annex)
.
During pre--cleaning the display shows:
After pre--cleaning, the main cleaning process is activated
(see annex)
. If you select the detergent dosing pump in Setup,
detergent will automatically be added to the water. The water
starts circulating.
Time starts running backwards from 10 to 0 minutes. You can
cut off the cleaning process at any time by pressing Start/
Stop.
After 10 minutes have lapsed, the liquid in the mixer jar is
drained off via the mixer outlet valve. The display shows:
After completion of the main cleaning process, rinsing starts
running
(see annex)
.
During the rinsing process the display shows:
After completion of rinsing, the following message is dis-
played:
After heat exchanger cleaning has been completed, the stainless steel coil is filled with wa-
ter. If an entitled animal enters the feeding station and is identified, the water portion in the
heat exchanger will be delivered into the mixer jar and then drained off via the mixer outlet
valve. Only then, the automatic feeder starts preparing a milk portion.
Turn the program switch to position „Feeding Mode“ in order to return to feeding mode.
Notes on automatic heat exchanger cleaning (time--controlled)
If the long electrode is covered, the automatic heat exchanger cleaning will be deferred for 1
hour at most so that an animal has the opportunity to drink up the liquid in the mixer jar. If
the animal does not drink up the liquid within this time (the electrode is still covered), the
liquid will be drained off via the mixer outlet valve and the cleaning cycle starts running.
If there is still milk in the stainless steel coil, the automatic heat exchanger cleaning will be
deferred for 1 hour at most, too. If an entitled animal enters the feeding station within this
time, the automatic feeder will start preparing at least two portions of water + milk powder.
clean HE
detergent 0 g/L
clean HE
detergent 10 g/L
pre-rinse HE
clean HE
clean HE
rem.:10:00min stop?
clean HE
emptying mixer
afterrinse HE
afterrinse HE
finished
Содержание TAK5-SA2-KFA-27-F1
