162 • Replacing or Recharging the Batteries Gas Tracer Operator’s Manual, CSA Ver
-
Replacing or Recharging the Batteries
WARNING:
To prevent ignition of a hazardous atmosphere, batteries must
only be changed or charged in an area known to be nonhazardous.
AVERTISSEMENT:Pour éviter l’inflammation d’une atmosphère dangereuse, les
batteries doivent uniquement être modifiés ou facturés dans une
zone connue comme non dangereuse.
Replace the batteries when the battery icon indicates that the unit is in low battery
warning. When in low battery warning, the lowest battery level indication bar is
displayed in the battery icon on the LCD, and it will be flashing.
Replacing Alkaline Batteries
NOTE:
Use Procell PC 1500 alkaline batteries, Duracell MN 1500 alkaline
batteries, or RKI Instruments lithium ion battery pack 49-1615RK to
maintain the CSA classification of the Gas Tracer. Use of other batteries
will void the CSA classification and may void the warranty. Do not mix
old/new or different types of batteries.
NOTE:
Utiliser Procell 1500 piles alcalines, Duracell MN 1500 piles alcalines, ou
RKI Instruments pack batterie lithium-ion 49-1615RK de maintenir la
classification CSA de la Gas Tracer. L’utilisation d’autres piles annule la
classification CSA et peut annuler la garantie. Ne mélangez pas les
anciennes/nouvelles ou différents types de piles.
1. Turn off the Gas Tracer.
WARNING:
Do not remove the batteries while the Gas Tracer is on.
2. Turn the battery cover release knob counterclockwise, remove the battery
cover, and lay it aside.
3. Carefully remove the old alkaline batteries. Verify that the battery
compartment and electrical contacts are clean.
4. Carefully install the new AA alkaline batteries according to the battery
diagram inside the battery compartment.
Figure 19: Installing the Alkaline Batteries
5. Reinstall the battery cover and turn the battery cover release knob clockwise to
lock the cover in place.
OP
E
N
C
L
OS
E
