Gas Tracer Operator’s Manual, CSA Version Replacing or Recharging the Batteries • 165
If using a DC powered charging station, plug the 12 VDC vehicle plug adapter
into a vehicle’s 12 VDC power socket.
Figure 23: Connecting the Charging Station’s DC Adapter
The construction of the charging stations allows them to be chained together
but a separate adapter must be used for each charging station. One adapter
will not operate more than one charging station.
4. Place the Gas Tracer into the battery charging station as shown in Figure 24
below so that the metal contacts on the back of the unit come into contact with
the metal contacts on the back of the holder in the charging station. When
proper contact has been made, the red LED on the charging station will turn
on.
If you are using a DC adapter, the charging station comes with a velcro strap
to secure the Gas Tracer. Ensure that both ends of the velcro strap are attached
to the charging station and that it is securing the instrument.
To Vehicle
12 VDC
Power Socket
DC Adapter
Charge LED
DC Powered Charging Station
Power Supply Jack
