Gas Tracer Operator’s Manual, CSA Version
Optional Accessories • 23
• 8 meter hose with floating head
Figure 12: 8 Meter Hose with Floating Head
This probe is designed to be used in a tank or a well that may have water or
some other liquid at the bottom. As you lower the probe down, if it hits water,
it will float and continue to monitor the area.
See the “Parts List” on page 173 for probe ordering information.
Purge Tee Fitting
The 17-4430RK-01 purge fitting is used to detect gas levels in a pressurized gas
stream from a pipeline or vessel being purged. The sample port of the purge
fitting is inserted into the flowing gas, and the vent port will allow any excess gas
to release to the atmosphere to avoid damage to pump or sensors.
Figure 13: Purge Tee Fitting
GX-2012 Inlet
Pressurized
Stream
Sample Port
Excess
Pressurized
Sample
Vent Port
