RKC INSTRUMENT SR Mini System, Руководство по эксплуатации оборудования

Страница: 71 / 112

6. IN CASE OF TROUBLE
IMSRM02-E6
65
(1) PCP module related
Problem Probable cause Solution
RUN lamp does not light up Power not being supplied Check external breaker etc.
Appropriate power supply
voltage not being supplied Check the power supply
Power supply terminal contact
defect Retighten the terminals
Power supply section defect Replace PCP module
RUN lamp stays lit Module out of place Install back in place
The module was not initialized
after the module configuration
was changed Execute Module initialization or
return the configuration to its
original specifications
Data transmission and reception
(TX, RX) lamps not lit up Operation panel or host computer
power not on Check the power
Operation panel connection cable
disconnected Inspect cable and replace as
necessary
CPU section defect Replace PCP module
DO is not output Output allocation defect Check the allocation settings
Output circuit defect Replace the PCP module
FAIL is output PCP module CPU section, power
section defect Replace the PCP module
FAIL is output
(but FAIL lamp not lit up)
RUN lamp stays lit The module was not initialized
after the module configuration
was changed Execute Module initialization or
return the configuration to its
original specifications
Module out of place Install back in place