6. DeviceNet COMMUNICATION
IMR01Y09-E3
31
Continued from the previous page.
No. Items
Data
range
On
and
after
6
Selected measured items
Measured items set by the
configuration tool or via
Explicit message
communication are assigned by
the number of controllers
similarly set.
[Factory set value:
Measured value (PV)]
Same as the range of measured items selected
For the setting method of the number of communication words, refer to the following.
−
5.3 DIP Switch Setting (P. 22)
,
−
5.4 Communication Environment Setting by Rotary Switch (P. 23)
−
Number of communication words setting by DIP switch (P. 32)
−
Communication parameter setting by configuration tool (P. 33)
−
Communication parameter setting by Explicit message communication (P. 41)
For the setting method of the number of communication controllers, controller address and
automatic acquisition of controller address, refer to the following.
−
5.4 Communication Environment Setting by Rotary Switch (P. 23)
−
Communication parameter setting by configuration tool (P. 33)
−
Communication parameter setting by Explicit message communication (P. 41)
For the setting method of the action mode, refer to the following.
−
5.4 Communication Environment Setting by Rotary Switch (P. 23)
−
Communication parameter setting by Explicit message communication (P. 41)
For contents of setting data items, see
7. COMMUNICATION DATA LIST (P. 44)
.
