Riso SE 9380, Руководство пользователя

Страница: 19 / 268

Before Starting to Use
Paper Recommendations
17
Tips for Better Paper Feeding
To prevent paper jams and misfeeds, follow the directions below:
• When using standard or light-weight paper, set the Paper Feed Pressure Adjustment Lever to “NORMAL” ( ).
Then open all four Paper Arrangers. ) p.35, ) p.36
• When using thick paper (such as card stock), set the Paper Feed Pressure Adjustment Lever to “CARD” ( ),
and open the two inner Paper Arrangers. ) p.35, ) p.36
• When using slippery paper, set the Paper Feed Pressure Adjustment Lever to “CARD” ( ). ) p.35, ) p.36
• Use flat printing paper that is free of folds. If curled paper is unavoidable, place the printing paper so that the curl
faces down.
• Paper may stick to the Print Drum (Cylinder) surface if the top margin is too narrow on the original or if the upper
portion of the original uses a large amount of Ink. To solve this problem, lower the print position to provide a wider
top margin or reverse the top and bottom of the original. Then restart printing from the beginning.
Storing Environment
Store the printing paper in a level, dry area. Storing the paper in an excessively humid area can result in paper jams
or poor print quality.
After unpacking the printing paper, keep the remaining paper wrapped and store it in a moisture-proof box. It is highly
recommended to put silica gel in the paper storage box.