Riso SE 9380, Руководство пользователя

Страница: 152 / 268

Advanced Features
Reproducing the Master [Renew Page][Auto Page Renewal]
150
Reproducing the Master
[Renew Page][Auto Page Renewal]
The data from the last master-making process is temporarily stored on the machine.
Using this data, another master can be reproduced without repeating steps to scan the same original.
You can “Rotate” the original and recreate a master.
“Auto Page Renewal” is a function that automatically recreates a master when a specified number of pages are
printed. If you are printing a large-volume job of thousands or tens of thousands of copies, the master may degrade
before the job is completed.
If you set “Auto Page Renewal” to “ON” prior to starting a large-volume print job, a master will be automatically rec-
reated when the specified number of copies is reached (Auto Renewal Point). This allows you to maintain a consis-
tent print quality from start to finish.
Note:
• “Renew Page” works with data sent from a computer as well. However, if multiple pages exist, only the last page
will be processed with “Renew Page”.
• The “Renew Page” function is not available in the following conditions:
– immediately after startup
– after pressing the
key
– after executing “Auto Clear” (“Changing Default settings” ) p.170)
– after performing “Confidential”
– when an error has occurred during master-making
– after master-making for Data Output Mode (when the optional Key Card Counter is installed.)
• When “Renew Page” or “Auto Page Renewal” is selected, 2 proof copies will be made. When the print position has
been adjusted, the printer will center the Print Drum (Cylinder) to their original position, recreate the master and
print a proof copy. Then, the Print Drum (Cylinder) will move to the previously adjusted position and print another
proof copy.
• The number of pages in the proof copy when using “Auto Page Renewal” can be adjusted using “Admin.”. ) p.171
• When the print position has been adjusted, 2 proof copies will be made. (When the print position has not been
adjusted and when the print position has been adjusted)