Ricoh SCRIPT2, Руководство по установке

Страница: 282 / 406

NetWare Configuration
56
4
M
Create a printer as follows.
A
From the [ Available Options ] menu, select [ Print Server Information ] and press
the
{{{{
ENTER
}}}}
key.
B
To create a new print server, press the
{{{{
INSERT
}}}}
key and type a print
server name.
If you use a currently defined print server, select one of the print servers
shown in the
[ Print Server ] list.
Important
❒
Use the same name as that specified in the NIB Setup Tool. (Step
H
).
C
From the [ Print Server Information ] menu, select [ Print Server Configuration ] .
D
From the [ Print Server Configuration ] menu, select [ Printer Configuration ] .
E
Select the printer which is indicated as “Not Installed”.
F
If you want to change the name of the printer, type a new name.
A name "Printer x" is assigned to the printer. “x” stands for the number of
the selected printer.
G
As Type, select
[ Remote Other/Unkown ]
.
The IRQ, Buffer size, Starting form, and Queue service mode are automat-
ically configured.
H
Press the
{{{{
ESC
}}}}
key, and click [ Yes ] in the confirmation dialog box.
I
Press the
{{{{
ESC
}}}}
key to return to the [ Print Server Configuration ] menu.
N
Assign print queues to the created printer as follows.
A
From the [ Print Server Configuration ] menu, select [ Queues Serviced By Printer ] .
B
Select the printer created in step
MMMM
.
C
Press the
{{{{
INSERT
}}}}
key to select a queue serviced by the printer.
Note
❒
You can select more than one queue at a time.
D
Follow the instructions on the screen to make other necessary settings.
When you have finished the previous steps, confirm that the queues are as-
signed.
O
Press the
{{{{
ESC
}}}}
key until “Exit?” appears, and select [ Yes ] to exit PCON-
SOLE.
P
Turn the printer power off and on.
Note
❒
To confirm that the printer is configured correctly, type as follows from the
command prompt.
F:> USERLIST
❒
If the printer works as configured, the name of the print server appears as
an attached user.