Ricoh SCRIPT2, Руководство по установке

Страница: 123 / 406

Error & Status Messages
39
4
A3:Error There is too much data for the
I/O buffer to handle. Check if the interface cable
is inserted into the printer
and the computer securely.
Check if the interface cable
is damaged or broken.
Increase the size of the I/O
buffer.
⇒
P.79 “Using the
Operation Panel”
A6:Error There is not enough printer
memory to print one or more of
the pages in the print job. See P.114 “Low Memory” .
AB:Error The printer is unable to process
the data you are trying to print. Install optional memory
unit to increase the amount
of printer memory.
Reduce the amount of data
being sent to the printer.
B0:Error An error has occurred in the
optional memory unit. Turn the printer off and on.
Then, try to print again.
Turn off the printer. Re-
move and reinstall the
memory unit and turn on
the printer. Then, try to
print again.
Turn off the printer. Re-
move the memory unit and
turn on the printer. Then,
try to print again.
Note
❒
In this case, you might
not be able print com-
plex print jobs.
B1:Error An error has occurred in the
standard parallel interface. Contact your sales or ser-
vice representative.
B3:Error The printer setting is wrong. Reset the printer using
"Menu Reset" of the "Main-
tenance" menu.
⇒
P.79 “Us-
ing the Operation Panel”
B5:Error An error has occurred in the
RICOH-SCRIPT2 module. Contact your sales or ser-
vice representative.
Message Description Comments