Ricoh SCRIPT2, Руководство по установке

Страница: 231 / 406

Using PortNavi
5
1
Installing PortNavi
Follow the procedure below to install PortNavi.
A
Configure the IP parameters on the Network Interface Board using the op-
eration panel.
Reference
For more information about setting IP parameters, see “Configuring the
printer for the Network with the Operation Panel” in the Setup Guide that
comes with this printer.
B
Insert the CD-ROM into the CD-ROM drive.
Note
❒
If the installer starts automatically, you can use it to install PortNavi. Fol-
low the instructions on the screen.
C
Open [ Control Panel ] , and double-click the [ Add/Remove Programs ] icon.
D
On the [ Install/Uninstall ] tab, click [ Install ] .
E
Click
[ Next > ]
.
F
Type the name of the CD-ROM drive in the [ Command line for installation pro-
gram ] box, followed by “:\NETWORK\PORTNAVI\DISK1\SETUP.EXE”
(do not include the quotation marks), and then click [ Finish ] .
Note
❒
An example would be “D:\NETWORK\PORTNAVI\DISK1\SETUP.EXE”
when the drive letter is “D”.
G
From the [ Choose Setup Language ] list, select the language you want to use,
and then click [ OK ] .
H
After the [ Welcome ] dialog box appears, click [ Next > ] .
Follow the instructions on the screen.
After installation is complete, configure the printer port with PortNavi.
⇒
P.7
“Setting Up the Printer Driver”
Note
❒
If the dialog box asking if you want to restart the computer appears, select
[ Yes, I want to restart my computer now. ] .