Ricoh SCRIPT2, Руководство по установке

Страница: 290 / 406

NetWare Configuration
64
4
D
Click [ TCP/IP protocol ] .
E
Click the IP address of the Network Interface Board which is to be config-
ured, and click
[ Next > ] .
Note
❒
If you do not know which Network Interface Board you are configuring,
see a network configuration page to confirm the MAC address (Network
Address).
F
Confirm that the MAC address and IP address are correct, and click [ Finish ] .
The [ NIB Setup Tool ] window appears.
G
Click [ Configure ] .
The property sheet appears.
H
Click the [ General ] tab, and type the name of the print server into the [ Device
Name: ] box.
I
Click the [ NetWare ] tab, and make the following settings.
A
In the [ Print Server Name: ] box, type the name of the print server.
B
In the
[ File Server Name: ]
box, type the name of the file server in which a
print server is to be created.
Clicking
[ Browse ]
, you can select a file server among those listed in the
[ Browse File Server ] dialog box.
C
In the [ NDS Context: ] box, type the context of the print server.
Clicking
[ Browse ]
, you can select a NDS tree and a NDS context among
those listed in the [ Browse Context ] dialog box.
As a context, object names are typed from a lower object and divided by a
period. For example, if you want to create a print server into NET under
DS, type "NET.DS".
D
In the [ Print Server Operation Mode ] group, click [ As Print Server ] .
E
Click [ OK ] to close the property sheet.
F
After a confirmation dialog box appears, click
[ OK ]
.
J
On the [ NIB ] menu, click [ Exit ] to exit the NIB Setup Tool.
After this step, go to step
K
on P.61 “Setting Up as a Print Server” .