Ricoh SCRIPT2, Руководство по установке

Страница: 281 / 406

NetWare 3.x - Advanced Settings
55
4
E
Click the IPX address of the Network Interface Board which is to be config-
ured, and then click
[ Next > ] .
Note
❒
If you do not know which Network Interface Board you are configuring,
see a network configuration page to confirm the MAC address (Network
Address).
F
Confirm that the MAC address and IPX address are correct, and click [ Fin-
ish ] .
The [ NIB Setup Tool ] window appears.
G
Click [ Configure ] .
The property sheet appears.
H
Click the [ General ] tab, and type the name of the print server into the [ Device
Name ] box.
I
Click the [ NetWare ] tab, and make the following settings.
A
Select [ Bindery ] .
B
In the [ File Server Name: ] box, type the name of the file server in which a
print server is to be created.
Click [ Browse ] to select a file server among those listed in the [ Browse ] dia-
log box.
C
Click [ OK ] to close the property sheet.
D
After a confirmation dialog box appears, click [ OK ] .
J
On the [ NIB ] menu, click [ Exit ] to exit the NIB Setup Tool.
K
Type “PCONSOLE” from the command prompt.
F:> PCONSOLE
L
Create a print queue as follows.
Note
❒
If you use a currently defined print queue, go to step
M
.
A
From the [ Available Options ] menu, select [ Print Queue Information ] and press
the
{{{{
ENTER
}}}}
key.
B
Press the
{{{{
INSERT
}}}}
key and type a print queue name.
C
Press the
{{{{
ESC
}}}}
key to return to the [ Available Options ] menu.