Ricoh SCRIPT2, Руководство по установке

Страница: 322 / 406

Appendix
96
6
Message List
This is a list of messages written to the printer's system log. The system log can
be viewed using the syslog command.
System Log Information
You can use the following methods to view the system log.
• telnet : Use the syslog command.
⇒
P.84 “System log information”
Message when the Network Interface Board starts or restarts
Network Interface Board Ver.x.x.x The version number of the Network Interface
Board.
PRINTER SYSTEM “system name” Ver.x.x.x The system name and version of the printer.
Attach FileServer=“file server name” The printer is attached to “file server name” as
the nearest server.
Current Interface Speed:xxxMbps The speed of the network (10 Mbps or 100
Mbps).
Current IPX address The current IPX address.
Frametype=“frame type name” The "frame type name" is configured to be
used on NetWare.
NetBEUI Computer Name=“computer name” The NetBEUI Computer Name is defined as
"computer name".
Start httpd The Web server has been started.
Start npmpd for IPX The npmpd for IPX protocol has been started.
Start npmpd for TCP/IP The npmpd for TCP/IP protocol has been
started.
Start smbd direct print mode(NetBEUI) You can print from a client on the Windows
network via the print server.
Start snmpd Ver.2.0 The SNMP agent of the displayed version has
been started.
Vendor= , Country= , Lang= The vendor, the country code, and the lan-
guage.