Ricoh SCRIPT2, Руководство по установке

Страница: 358 / 406

Using RICOH-SCRIPT2 with Windows
14
1
❖ ❖ ❖ ❖
Halftone
Changing this setting will not affect printing result.
❖
❖ ❖
❖
Halftone Setup
Changing this setting will not affect printing result.
❖ ❖ ❖ ❖
Form to Tray Assignment
You normally do not need to change this setting.
Note
❒
If the paper tray you want to use is not available here, even though it is
physically installed, use the
[ Device Settings ] tab to make the printer recog-
nize the tray correctly.
❖ ❖ ❖ ❖
Font Substitution Table
Use this to edit the TrueType font substitution table. Under [ Font Substitution
Table ] , the TrueType fonts installed on the computer are displayed. Select the
setting you want to use from [ Change Setting ] for each TrueType font.
❖ ❖ ❖ ❖
Job Timeout
Use this to set a job timeout period in the range of 0 to 32767 seconds. Setting
the value to 0 turns the job timeout off.
❖ ❖ ❖ ❖
Wait Timeout
Use this to set a wait timeout period in the range of 0 to 32767 seconds. Setting
the value to 0 turns the wait timeout off.
❖
❖ ❖
❖
Total Printer Memory
Use this to select the amount of memory actually installed in the printer. The
following items are available:
[ 32 MB ] , [ 64 MB ] , [ 96 MB ] , [ 128 MB ] , [ 160 MB ] , [ 192
MB ]
and
[ 256 MB ]
.
❖
❖ ❖
❖
Option Tray
Use this to select if the optional tray is installed in the printer. The following
items are available:
[ None ] and [ Tray 2 ] .
❖
❖ ❖
❖
Duplex Unit
When the optional duplex unit is installed to the printer, select [ Installed ] . If
not, select [ Not Installed ] .