Ricoh SCRIPT2, Руководство по установке

Страница: 397 / 406

Using the Installation Shell Script
9
1
HP-UX
❖
❖ ❖
❖
Adding the IP address and host name to the /etc/hosts file
The following line is added to the /etc/hosts file.
192.168.15.16 np # Network Printer
• 192.168.15.16 is the IP address, np is the host name, from # to the end of the
line is a comment.
Note
❒
The /etc/hosts file contains a list of the IP addresses and their host names
of all of the hosts communicating on the network. Each entry is delimited
with a space or a tab, and each line is separated with a return.
❒
If you do not use NIS or DNS, you must manually enter the IP address and
host name of each workstation using the network printer in the /etc/hosts
file.
❖ ❖ ❖ ❖
Registering the printer
The installation shell script registers the printer as a remote printer following
the procedure below.
A Stop the scheduler.
/usr/lib/lpshut
B Register the printer.
/usr/lib/lpadmin -P np -v/dev/null -mrmodel
-orm nphost -orp lp -ob3
• np is the printer name, nphost is the host name.
C Set the printer so that the print job is listed in the print queue.
/usr/lib/accept np
D
Set the printer to perform the print job.
/usr/lib/enable np
E Restart the scheduler.
/usr/lib/lpsched