Ricoh SCRIPT2, Руководство по установке

Страница: 324 / 406

Appendix
98
6
NetBEUI (When the Network Interface Board is started)
TCP/IP
❖ ❖ ❖ ❖
When the address is configured
❖ ❖ ❖ ❖
When using lpr
At the beginning of the message, the IP address of the client is displayed with-
in parentheses.
Back to default name (<Computer name>) The same computer name is detected on the
network. As unable to add computer name to
the suffix, Computer name back to default
name. Configure a new computer name that is
unique.
Print session full Cannot accept the print session.
Required computer name (<Computer
name>) is duplicated name The same computer name is detected on the
network. The start job determines the comput-
er name by adding the computer name to the
suffix (0,1....). Configure a new computer
name that is unique.
Invalid gateway address The gateway address is not correct for the
specified IP address.
filter data error Some data cannot be handled by the filter
option. Confirm the file code and the settings
of the filter option.
lost connection The connection was cut by the other party.
Check the printer to which you requested to
print.
print requests full Cannot accept the print request (max. 5 ses-
sions). Confirm the status of the printer with
telnet, and print it again after the print re-
quest becomes less than 5 sessions.
printer permission denied Cannot get permission to use the printer.
Confirm the access rights with the access
control address and the access control mask.
printer refuse Something is wrong with the printer. Con-
firm the status of the printer.