Ricoh SCRIPT2, Руководство по установке

Страница: 352 / 406

Using RICOH-SCRIPT2 with Windows
8
1
❖ ❖ ❖ ❖
Available PostScript Memory
Shows the amount of memory installed on the printer. You normally do not
need to change this setting.
Note
❒
You can change this setting by changing the memory setting in
[ Installable
Options ] .
❖ ❖ ❖ ❖
Send CTRL-D Before Each Job, Send CTRL-D After Each Job
When the printer is connected to the network, select
[ No ]
for both
[ Send CTRL-
D Before Each Job ]
and
[ Send CTRL-D After Each Job ]
When the printer is connected to the computer via parallel cable, select [ Yes ]
both for [ Send CTRL-D Before Each Job ] and [ Send CTRL-D After Each Job ] .
❖
❖ ❖
❖
Job Timeout
Use this to set a job timeout period in the range of 0 to 32767 seconds. Setting
the value to 0 turns the job timeout off.
❖ ❖ ❖ ❖
Wait Timeout
Use this to set a wait timeout period in the range of 0 to 32767 seconds. Setting
the value to 0 turns the wait timeout off.
❖ ❖ ❖ ❖
Installable Options
• Total Printer Memory
Use this to select the amount of memory actually installed in the printer.
The following items are available:
[ 32 MB ] , [ 64 MB ] , [ 96 MB ] , [ 128 MB ] , [ 160
MB ]
,
[ 192 MB ]
and
[ 256 MB ]
.
• Option Tray
Use this to select if the optional tray is installed in the printer. The follow-
ing items are available:
[ None ] and [ Tray 2 ] .
• Duplex unit
When the optional duplex unit is installed to the printer, select [ Installed ] .
If not, select [ Not Installed ] .