Ricoh SCRIPT2, Руководство по установке

Страница: 271 / 406

Configuring LPR Port Printing
45
3
Configuring LPR Port Printing
This section explains the procedure for printing to a LPR port from Windows
NT.
Note
❒
The following procedure assumes that the printer drivers have already been
installed. This is the procedure to change the printer port to LPR.
❒
The TCP/IP protocols must be installed and configured correctly. For more
information about configuring the protocol, see P.33
“Configuring TCP/IP and
IPP for Printing” .
A
Click [ Start ] , point to [ Settings ] , and then click [ Printers ] .
B
Click the icon of the printer you want to use. On the [ File ] menu, click [ Prop-
erties ] .
C
Click the [ Ports ] tab, and then click [ Add Port ] .
D
In the [ Available Printer Ports ] box, click “LPR Port”, and then click [ New Port ] .
Note
❒
If “LPR Port” does not appear, “Microsoft TCP/IP Printing” has not been
installed.
E
Type the IP address of the Network Interface Board into the [ Name or address
of server providing lpd ] box.
F
Type “lp” into the
[ Name of printer or print queue on that server ]
box, and click
[ OK ] .
G
Click [ Close ] .
H
Confirm that the port name is displayed in the [ Print to the following port(s) ]
box and the check mark is inside the check box, and then click [ OK ] .