Rhymebus RM5G, Руководство пользователя

Страница: 60 / 104

~DESCRIPTIONS OF FUNCTION CODE SETTINGS~
- 52 -
Run
command
X2
DC braking
enable
output
frequency
DC
braking
F_032
start frequency
F_132 frequency of
DC braking stop
DC
braking
F_121
: UP/DOWN frequency adjust
Adjust UP/DOWN frequency setting from KEYPAD directly
UP/DOWN instruction changes frequency setting
(Store automatically to F_121 after 5 seconds)
± 16: select analog input source
F_123=3: Vin or Iin (by multi-function input switch)
Input terminal setting equal=+16,contact a(open),select Vin
contact b(close),select Iin
Input terminal setting equal=-16,contact a(close),select Iin
contact b(open),select Vin
d. Multiple function input terminals X1~X6 programmed to 0, the
function as followings:
(1)
F_052
: Input terminal X1 setting
0: UP/DOWN command enter key
X1 and COM open
→
UP/DOWN command set the
frequency value, but output frequency did not change.
X1 and COM close
→
output frequency acc./ dec.
until frequency setting command .
(2)
F_053
:Input terminal X2 setting
0:DC braking enable(stop status)
When inverter is stop, terminal X2 ON(DC braking enable), it product the
DC braking status .The output current follow the F_075 current of the DC
braking.
When the run command or jog command enable, the DC braking status
stop then motor start run to the frequency setting value.
When the run command or jog command disable, the output frequency
decelerate to F_132 DC braking stop frequency, then DC braking enable.