REICH MOVE CONTROL ECONOMY LIGHT, Инструкция по установке и эксплуатации

Страница: 25 / 56

GB7
E
n
g
li
s
h
7. Remote control
Driving forwards
Both drive units pull forwards with
full power.
You can press any of the movement buttons sin-
gly or together. The arrows on the buttons show
the respective direction of movement.
B4 Direction buttons:
Turn towards the right front
Only the left drive unit pulls for-
wards with full power. The right
drive unit is blocked.
Turn towards the left front
Only the right drive unit pulls for-
wards with full power. The left drive
unit is blocked.
Driving backwards
Both drive units pull backwards with
full power.
Turn towards the right rear
Only the left drive unit pulls back-
wards with full power. The right
drive unit is blocked.
Turn towards the left rear
Only the right drive unit pulls back-
wards with full power. The left drive
unit is blocked.
Left turn on the spot
The right drive unit pulls forwards
with full power. The left drive unit
pulls backwards with full power.
Right turn on the spot
The left drive unit pulls forwards
with full power. The right drive unit
pulls backwards with full power.
Arc towards the front right
The left drive unit pulls forwards
with full power. The right drive unit
pulls forwards with reduced power.
Arc towards the front left
The right drive unit pulls forwards
with full power. The left drive unit
pulls forwards with reduced power.
Arc towards the rear right
The left drive unit pulls backwards
with full power. The right drive unit
pulls backwards with reduced pow-
er.
Arc towards the rear left
The right drive unit pulls backwards
with full power. The left drive unit
pulls backwards with reduced pow-
er.
The cable connections of the right or left drive unit
to the base station and the motor must be
checked and reversed as required (see connec-
tion plan) when the manoeuvring movements do
not correspond to the symbols shown on the re-
mote control.
It is essential to switch OFF the main switch and
to separate the base station from the voltage
supply before performing any work.
Never swap the plus (+) and minus (-)
connection of the voltage supply!
Buttons for automated swivelling
on and swivelling off. These have
no function in the MoveControl
version.