REICH MOVE CONTROL ECONOMY LIGHT, Инструкция по установке и эксплуатации

Страница: 21 / 56

227-10182 Fastening kit 3.4, stabilizer
rod, 2 m, for vehicles over 2240 mm
track width (dimension F),
227-101825 Stabiliser bar 2.5 m
for vehicles with excess width
227-1018 Stabiliser bar 1,5 m
227-10213 Frame extension 113 mm
for Eriba Troll model 2003
Set with 2 plates 113x230x38 mm
OHNE ABE
227-1021 Frame extensoin 200 mm,
set with 2 plates 200x230x35 mm
for frame height being too small
(dimension A),
WITHOUT ABE
227-102180 frame extension 180 mm,
set with 2 plates 185x230x35 mm
WITHOUT ABE
227-1036 Fastening kit Eriba Troll
up to model 2002
WITHOUT ABE
227-1035 Fastening kit 3.8
for models with square frame,
(e. g. Eriba Touring from model 2004)
set with 2 plates 113 x 230 x 38 mm
WITHOUT ABE (type approval)
227-1025US Clamping plate, straight
for U-profile chassis, 2 pieces
Clamping plate, angled for Twin-
Versions MoveControl
227-2019 left 16 mm
227-2020 right 16 mm
227-2021 left 20 mm
227-2022 right 20 mm
Clamping plate MC Twin (for heavy
vehicles)
227-2017 angled left
227-2018 angled right
227-1191S Frame extension
for frame thickness of less than 3 mm
(dimension C) or a frame height being
too small (dimension A)
2 pieces (WITHOUT ABE)
227-11451 Fastening kit 3.7
Jack support (Caution: a stabilizer rod
of 2 m length might be required!!) in
case of impeding jack support
L-Profile U-Profile
Floor Caravan
The chassis frames of mobile homes and trailers
are distinguished by L-profiles and U-profiles.
Depending on the mounting situation, different
fastening kits are required, which are available as
option.
Check the installation dimensions
of your
MoveControl by means of the table on page 4.
Never remove, modify or impair parts of the chas-
sis, of the axle suspension or of the brake gear.
In Germany, any modification of the chassis is
subject to the approval of a motorcar expert.
Please make enquiries concerning the
approval of the MoveControl and the
accessories for your vehicle regarding
your country!
227-1037 Fastening kit 3.3 for chassis
with track width less than 1.45 m
(dimension F)
227-102191 Fastening kit 3.5
in case of overall size frame/tyres
(dimension E) too small (e. g. frames in
lightweight construction)
227-11452 Adapter spare wheel carrier
“GB”, for displacement of the spare
wheel carrier at the ALKO-chassis
227-1145 Fastening kit 3.6
for displacement of the spare wheel
carrier at the ALKO-chassis
GB3
3. Mounting situation
E
n
g
li
s
h