B-2
Redline Management Suite Administration and Maintenance Guide
Redline Communications Inc. Confidential and Proprietary
WARNING: Classification
Failure - Invalid DSAP
The following conditions must be true:
The value of the Destination Service
Access Point (DSAP) must be <256
and not equal to 170.
Set the DSAP to a value less than 256, but not
equal to 170.
DSAP is the Destination Service Access Point,
an 8-bit field that allows the upper layer of the
network stack (such as the Logical Link Control
(LLC) layer) to keep track of multiple
connections. This is one of the packet
classification criteria.
WARNING: Classification
Failure - Invalid Ethertype
The following condition must be true:
The value of Ethertype must be
between 1500 and 65536.
The Ethertype indicates the length of an LLC
frame. The range (between 1500 and 65536) is
used as Ethertype sub-protocol identifier.
Set Ethertype to a value between 1500 and
65536.
WARNING: Invalid IP
source/destination Port
The following condition must be true:
PortLo < PortHi < 65536.
The source/destination port may be used for
classification purposes. If the port value from the
packet is between Port Low and Port High, then
the packet matches this classification criterion.
This is 16-bit field and the maximum value can be
65535.
WARNING: Classification
Failure - Invalid IP Protocol
The following condition must be true:
IP Protocol < 256
IP Protocol is 8-bit field. The maximum value is
255.
Warning: Invalid Source Mask The IP Mask shall be specified by a
number of contiguous one-bits starting
from left to right.
For example, the IP mask of 255.255.255.0 is
correct, but 255.0.255.255 is incorrect.
WARNING: Classification
Failure - Invalid MAC
Destination Mask
The MAC Mask must be specified by a
number of contiguous bits starting
from left to right.
For example, the MAC mask of
FF:FF:FF:00:00:00 is correct, but
FF:00:00:FF:FF:FF is incorrect.
WARNING: Classification
Failure - Invalid MAC Source
Mask
The MAC Mask must be specified by a
number of contiguous bits starting
from left to right.
For example, the MAC mask of
FF:FF:FF:00:00:00 is correct, but
FF:00:00:FF:FF:FF is incorrect.
WARNING: Classification
Failure - Invalid User Priority
The following condition must be true:
UserPriLo < UserPriHi < 8
The User Priority is a 3-bit field (the maximum
value is 7) which can be used to classify packets.
If the User Priority value from the packet is
between [UserPriLo, UserPriHi], then the packet
matches this classification criterion.
WARNING: Classification
Failure - Invalid VLAN
The following condition must be true:
VLAN ID < 4096
Set the VLAN ID to a value less than 4096.
WARNING: Classification
Failure: Too many Destination
Port Ranges
The current setting exceeds the
maximum value of 63.
Reduce the number of destination port ranges.
Table B-1
AN100U/UX Event Log Messages (continued)
Message
Description
Comment
