2-6
RedMAX Administration and Maintenance Guide
Redline Communications Inc. Confidential and Proprietary
Step 3
When the command prompt screen appears, login using the following values:
Username: debug
Password: debug
Connecting to the Subscriber Unit Command Line Interface
The subscriber unit provides a command line interface, through which you can display and
modify the device’s current configuration. You require Telnet or a similar application to
connect to the subscriber unit.
The IP address 192.168.101.2 is also available, but this address can be changed. The IP
address, 192.168.101.1 is always available, regardless of build date or custom
configuration.
Note
The default IP address may differ depending on the firmware build date.
You must have connectivity from the sector controller to the subscriber unit before you can
use this procedure.
Step 1
Open the Windows Start Menu and select Run:
Start > Run
Step 2
Enter the following command:
telnet 192.168.101.1
If you have configured another local IP address you must use that address.
Step 3
When the command prompt screen appears, login using the following values:
Username: admin
Password: admin
You are now connected to the CLI of the subscriber unit. Refer to the RedMAX Outdoor
Wireless Access Subscriber Modem (SUO) User Guide for detailed information on using
the CLI.
Monitoring System Event Logs
System events for both the AN100U/UX and subscriber unit are captured in an event log.
The event log for both devices can be accessed via their respective command line
interfaces (CLI).
Both devices order their event log chronologically with the most recent event first in the
list. Each event is time stamped with either the system time, or a time of day obtained from
a time server, if one has been configured in your system.
