RDZ WI-SA, Техническое руководство по установке

Страница: 4 / 56

4
Table A - FLASHING SYMBOLS
MOVING ICONS
When the mouse
cursor is blinking...
Pressing the button... What happens is...
or
You can access the previous or following screen
you can access modifiable fields within the current screen
you can go back to the previous menu
or
You can access the following field (where present)
you can access the sub menus
VALUE FIELDS
example:
24°C
or
You can increase/decrease the value (e.g.: from “24°C” to “25°C”)
You can confirm the value and proceed to the next field
TEXT FIELDS
example:
Off/On
or
you can change the current setting (e.g.: from “ON” to “OFF”)
You can confirm the value expressed by the text and proceed to the next field
Moreover, it can be used in the following operating modes:
• AUTONOMOUS MODE: to be installed on systems with independent power production.
• SLAVE MODE: to be installed on systems with centralised power production. This configuration provides for the use of the
MASTER.NET control unit.
Characterised by three values of the following meaning:
WI - SA xxyy - a
Key:
xx: number of mixing systems <=8
yy: number of controlled zones: each one having independent temperature and humidity controls <=64
a.: number of controlled air handling units (dehumidification, ventilation, air renewal and, integration) <=8
The WI project includes 2 product families:
WI-SA: stand-alone controller
WI.NET:control system with centralised energy production (through “Bus.NET”).
The illustrated manual describes all the possible operating modes.
NB: According to the configuration, the control unit can inhibit the display of some screens, since they do not have any meaning
for that particular configuration.
Esc
Prg
Alarm
Option to access the next screen
Option to access the modifiable fields
Option to access submenus
Option to access subsequent fields
Only option to access the previous menu
Program
“UP” button
“CONFIRM” button
“EXIT” button
“DOWN” button
E
Prg
Esc
Allarm
Program
“EXIT” button “UP” button “DOWN” button “CONFIRM” button