R&S FSV-K7, Руководство по эксплуатации, Страница: 76 / 262

Analog Demodulation Option R&S FSV–K7
R&S
®
FSV-K7/K7S
76 Operating Manual 1176.7561.02 ─ 06
2.2.12 Softkeys of the Input/Output Menu
The following table shows all softkeys available in the "Input/Output" menu. It is possi-
ble that your instrument configuration does not provide all softkeys. If a softkey is only
available with a special option, model or (measurement) mode, this information is pro-
vided in the corresponding softkey description.
Input (AC/DC) ................................................................................................................76
Noise Source .................................................................................................................76
Video Output ................................................................................................................. 76
Tracking Generator ....................................................................................................... 77
Power Sensor ................................................................................................................77
Trigger Out .................................................................................................................... 77
External Mixer ............................................................................................................... 77
Probe Config ................................................................................................................. 77
Signal Source ................................................................................................................77
└ Input Path ........................................................................................................77
└ Connected Device ...........................................................................................78
└ Input Sample Rate .......................................................................................... 78
└ Full Scale Level ...............................................................................................78
└ Level Unit ........................................................................................................78
└ Adjust Reference Level to Full Scale Level .................................................... 78
EXIQ ..............................................................................................................................78
└ TX Settings ..................................................................................................... 79
└ RX Settings ..................................................................................................... 79
└ Send To ...........................................................................................................79
└ Firmware Update ............................................................................................ 79
└ R&S Support ................................................................................................... 79
└ DigIConf ..........................................................................................................79
Digital IQ Info ................................................................................................................ 80
Input (AC/DC)
Toggles the RF input of the R&S FSVA/FSV between AC and DC coupling.
This function is not available for input from the R&S Digital I/Q Interface (option
R&S
FSV-B17).
Remote command:
INPut:COUPling
on page 178
Noise Source
Switches the supply voltage for an external noise source on or off.
Remote command:
DIAGnostic<n>:SERVice:NSOurce
on page 185
Video Output
Sends a video output signal according to the measured level to the connector on the
rear panel of the R&S
FSVA/FSV.
Note: Video output does not return valid values in IQ or FFT mode.
Remote command:
OUTP:IF VID
, see
OUTPut:IF[:SOURce]
on page 184
Softkeys of the Analog Demodulation option