Qualstar XLS Series, Техническое и сервисное руководство

Страница: 93 / 366

XLS Library Technical Service Manual 6-1
6 Shutting Down the XLS
This chapter provides instructions for shutting down the XLS to perform a service
operation.
6.1 What Happens When the XLS is Shut Down
When the XLS is shut down, it performs the following actions:
•
It completes all current and pending moves.
•
It moves the handler and carousel to their home positions.
•
It logs an event in the event log and sends a message to designated users.
•
It goes into physical mode.
•
It closes X-Link and displays a system-halted message on the touch screen.
When the shut-down process is complete, the Fault LED (red) flashes, indicating that it is
safe to move the power switch to the off position.
6.2 Shutting Down the XLS
To shut down the XLS, follow these steps:
1. Make sure that no backup operations are in process, then shut down the
applications. Refer to the documentation for the software applications.
2. From X-Link, press the Home button in the upper right corner of any page to
return to the Home page.
3. Access the Physical Library portlet or the Service portlet (see Section 5.3 on
page 5-7 ).
4. Select Physical Mode to put the XLS in physical mode. See Section 5.4.3 on
page 5-10 .
5. Select Shutdown Library . The Shutdown Library confirmation page opens, as
shown in Figure 6-1 on page 6-2 .