Qualstar XLS Series, Техническое и сервисное руководство

Страница: 18 / 366

1.3 Tools Check List
1-4
501610 Rev. 07-01-19
ESD Precaution
CAUTION
Before replacing any of the printed circuit board assemblies (PCBAs) in
the XLS Library, ensure that the environment is free of conditions that
could cause electrostatic discharge (ESD). If possible, use a grounded
static protection wristband. If a wristband is not available, touch a
known grounded surface.
1.3 Tools Check List
Table 1-2 is a check list of the tools required to remove and install XLS components.
Tool
3/4-inch open-end wrench
3/8-inch Allen wrench
5/16-inch Allen wrench (right angled if possible)
1/4-inch Allen wrench
3/16-inch Allen wrench
5/32-inch Allen wrench
7/64-inch Allen wrench (regular or T-handle)
5/64-inch Allen wrench
#1 Phillips screwdriver
#2 Phillips screwdriver
Long flat-bladed screwdriver (magnetized if possible)
7/16-inch nut driver and ratchet
1/4-inch nut driver
Standard pliers
Needle-nosed pliers
Needle-nosed pliers with smooth blades
Precision level
Small metric ruler or calipers
Cable tie cutters
Cotton swabs
Isopropyl alcohol
Table 1-2 Tool check list