Qualstar XLS Series, Техническое и сервисное руководство

Страница: 279 / 366

15
Replacing MEM Components
XLS Library Technical Service Manual 15-
265
6. Power off the left or right carousel, as follows:
– If you want to power off the carousel attached to the left side of the LRM,
select Power Off Carousel Left from the Carousels section of the page.
– If you want to power off the carousel attached to the right side of the LRM,
select Power Off Carousel Right from the Carousels section of the page.
When the carousel controller is powered off, you will hear a click as the door-lock
solenoids are disengaged.
15.3.2 Removing the Carousel Motor
To remove the carousel motor, follow these steps:
1. Access the carousel motor bracket and alignment pin, as follows:
– If the MEM is to the right of the LRM, remove the right side panel from the
MEM, as described in Section 10.3.1 on page 10-11 .
or
– If the MEM is to the left of the LRM, use a 1/4-inch Allen wrench to remove
the six 5/16 x 1/2-inch socket-head screws securing the LRM to the MEM.
Refer to the instructions in
Section 15.1.5 on page 15-10 .
Important: You can leave the XLS powered on when you remove the
side panel or the MEM. However, if you remove the
MEM from the LRM, be aware that you will need to
rescan all fiducials and cartridges after reattaching the
MEM.