Qualstar XLS Series, Техническое и сервисное руководство

Страница: 182 / 366

11.3 Upgrading a Fixed Port Assembly to an I/O Port
11-10
501610 Rev. 07-01-19
Step Task Refer to...
5 Replace the front panel
Section 10.2 on page 10-7
6
Power on the library, update the
hardware configuration, and scan the
fiducials and inventory
Section 17.5 on page 17-12
Table 11-3 Overview of replacing a fixed port assembly with an I/O port ( continued )
CAUTION
Before replacing a fixed port assembly with an I/O port, consider that
all logical libraries will be deleted as soon as you edit the hardware
configuration from X-Link.
In addition, you will need to allow time for the library to re-scan all
fiducials and barcodes.
Required tools and equipment:
Make sure you have the following:
•
#2 Phillips screwdriver with a 5-inch or longer blade, magnetized if possible
•
Needle-nosed pliers or spring attachment tool
•
Replacement I/O port assembly
•
6-32
×
3/8 Phillips screws (4)
•
I/O port magazine
11.3.1 Removing a Fixed Port Assembly
To remove a fixed port assembly, follow these steps:
1. Shut down the library and power it off. See Section 6.2 on page 6-1 .
2. Remove the front panel as described in Section 10.1 on page 10-1 and lean it
against a wall.
CAUTION
The touch screen is easily scratched. Protect the screen with a soft cloth
or other padding before leaning the front panel against any surface.